The 3D detailed assembly model is the detailed three-dimensional assembly of the structural parts of the ship, built up in MasterShip from the preceding process step. In MasterShip it is presented as a 3D model that is managed through the assembly manager, where the drawings of the assembly can be viewed, added, changed or removed in all orthogonal directions.
Figure 1: An example of a detailed 3D assembly model
Which SHIP-commands apply?
The following SHIP-commands apply to this deliverable:
- SHIPLAUNCHORGANISER — used for making the CoG & weight calculation.
- SHIPASSEMBLYMANAGER — in the assembly manager you can overview, change, add and remove drawings in all orthogonal directions (horizontal, longitudinal, frame, non-ortho). This is especially convenient if you miss certain drawings, or made a mistake or incomplete assembly at the initial definition of the assembly via the Organiser. You can also import drawings as xRefs.
In addition, the following knowledge-base articles already exist and are relevant to this deliverable:
- Importing external items — SHIPEDITCUSTOMITEM
- Making Arrangement drawings — SHIPEDITARRANGEMENTDRAWINGS
- Exporting the 3D model — SHIPBINDSOLIDMODEL
How can it be used?
As an intermediate deliverable, the 3D detailed assembly model is used in the next steps of the process. These include adding part data and making the production design. In addition, it is used for making CoG and weight calculations, for making arrangement drawings, and for exporting the 3D model for further engineering.
Comments (0 comments)