Welcome to our knowledge base! This knowledge is full with years-and-years of experience, freely accesible, and with a lot of practical tips and best practices for engineers in hull construction design. This is our way of giving back to the shipbuilding community. As we say: "for ship builders, by ship builders". Enjoy!

To make the information easily understandable, our knowledge base follows the typical design stages and process steps involved in hull construction design. Check out the process diagram here! Our knowledge base describes each of the steps.

Note: The articles contain engineering standards, and the application of MasterShip Software is supportive. Considerations from other perspectives like classification rules or yards standards are not taken into consideration in the articles. For a good design and building kit, these perspectives are not to be neglected.

All the best practices descibed can be used in any other 3D CAD software too.

Disclaimer: The content of this knowledge base and its articles are not per definition complete, correct or applicable to your case. The information in this knowledge base is here solely to enhance the engineer about MasterShip software. A correct application of the supplied information is the engineer's responsibility.