This article follows the nesting step, where the parts have already been placed and arranged on the plate. The main input here is the nested plate with the (inner and outer) contours of the parts. The purpose of this process step is to generate NC-code, which is the machine-readable code that drives the cutting / milling and marking machines in the workshop.

In general, whilst generating NC-code, the 2D nesting geometry is translated into the specific code format that a given CNC machine understands. This includes the part contours, the cutting order, the inlead positions where the torch or tool enters the material, and the marking lines and text.

Generating cutting code with MasterShip

The video gives a brief explanation of how generated cutting code looks like. MasterShip provides a set of SHIP commands that work together to turn a nesting into usable NC-code. A typical workflow for this would look as follows:

First, the pre-processing of a nested plate:

  1. SHIPAUTOCUTORDER: automatically create a cutting order of the parts quickly. You can also use SHIPDEFCUTORDER in stead to define the cutting sequence yourself manually. You can use SHIPEDITCUTORDER to edit the cutting order if needed. 
  2. SHIPAUTOEDITINLEAD: automatically place the inlead positions on the contours of the parts. You still have to check and modify them. Be aware that inleads are not starting in other parts, but always inside the waste material. Editing can be done using SHIPEDITINLEAD. Using SHIPOPTIONS you can define the shape of the inlead (arc or straight).
  3. SHIPPREPROEXPORT: output the pre-processing files for the NC code.

After the pre-processing is done, the actual cutting code can be done.

  1. SHIPCREATENCCODE: generate the cutting / milling and marking code for a selected NC machine. Because every machine has its own controller and code dialect, the nesting data has to be converted through a cutting template (post-processor) that matches the machine. A practical point of attention: The user gets the Default ESSI format from MasterShip; other formats can be developed based on the user's requirements. The Default ESSI cutting template developed by MasterShip is stored in the CFG folder within the MasterShip installation directory. Always check the needed template at the operator of the machine.
  2. SHIPSIMULATENCCODE: simulate the part-cutting process. This is used as a check, so that you can watch and check the direction of inlead, cutting order, marking lines and so on. It is much cheaper to fix a problem in the simulation than on the shop floor.
  3. SHIPCREATEMATLIST: Keep the material list as a final sanity check so that no part is missing from the plate before cutting starts.

Output variables and next steps

The output variable(s) of this step are the NC-code files (together with the pre-processing files) that are sent to the cutting, milling or marking machine, along with the simulation result and the material list. These feed directly into the next process step of actually cutting and marking the plate in production. 

Was this article helpful?

0 out of 0 found this helpful
Questions, or need help? Send us a request! Or add your value to the community by leaving a comment below! We will get back to you ASAP.

Articles in this section

Comments (0 comments)

Please sign in to leave a comment.